The paramount suspension upgrade for your XJ is a long arm system. Iron Rock Off Road's ROCK-LINK 3 link long arm system offers unrivaled performance, giving your Jeep both the capability and ride quality improvements that you have been looking for. This ROCK-LINK long arm upgrade is built for strength, clearance, adjustability, flexibility, and ease of install.
Minimum lift height required- 3"
STRENGTH: Our subframe is constructed with 1/4" steel and our lower arms are even thicker at 2"x5/16" wall D.O.M. tubing.
CLEARANCE: We tuck our subframe up as tight as possible to gain you the critical extra clearance to keep your Jeep low and your belly high! The lower arm connections at the chassis are as high as possible with still being able to install a bolt through them. The control arms have an inboard bend to clear your tires, so you can steer lock to lock without rubbing on them
ADJUSTABILITY: All the arms have tons of adjustment built in for your stock situation to your stretched crawler.
FLEXIBILITY:Yes, of course we are talking about articulation, and the ROCK-LINK delivers plenty! But we are also talking about flexibility to install other axle combinations with ease. Use this kit with your stock Dana 30 for now, and then bolt in a Dana 44 or Dana 60 down the road!
EASE OF INSTALL: No welding, no cutting, no complicated setup or templates. All you need is a drill, a floor jack, some jack stands and some hand tools. This is a BOLT-IN kit, although if your preferred method of installation is welding, you can do that! (NOTE: most installers opt to cut off the factory lower control arm mounts on the chassis, but it's not required)
KEY PRODUCT FEATURES:
2", 5/16" thick wall D.O.M. lower control arm material
1/4" thick, 3 piece, subframe assembly
Huge tire clearance with inboard control arm bends
Best ground clearance available with super high clearance long arm subframe mounts
Makes axle swaps much simpler!
Maintains caster through the suspension cycle
Easy to install without welding, only simple drilling is required!!! Seriously, you can install this in your driveway in a few hours!
NOTE: 2000 and 2001 models with automatic transmissions will require old style transmission mount such as 2625
REAR END
5.5" ultra premium leaf spring packs featuring: militarywrapped Berlin eye ends, 6 thin leaf design, tapered endswith Teflon anti-friction pads.
1" HD Add-a-Leaf
1.5" heavy duty lift shackle not only gives you the additional inch of lift, but also improved suspension articulation in therear of your XJ.
*Note: Running 35" tires will require minor fender trimming.
KIT INCLUDES:
3 Piece High Clearance HD Subframe Assembly
Front Long Arms with 7.5° Caster Adjuster
8" Coil Springs
5.5" Leaf Springs
1" Lift Add a Leaf
1.5" Lift Shackle
Hydro 8000 Shocks
HD Track Bar with Double Shear Frame Mounting Bracket
Extended Length Stainless Steel Brake Hoses
Extended Length Front Sway Bar Links
Drop Pitman Arm
U-Bolts
All necessary hardware
[ITEMPRICE]