JK 1 TON Axle Swap Truss - Front Dana 60
Designed specifically to make the 05+ Ford Dana 60 bolt into the front of your Jeep JK/JKU!
When sourcing your Dana 60 Axle for this swap choose the following specs:
05-Current Ford Front Dana 60
F250 or F350 Super Duty
Single Rear Wheel Truck
Choose from "Truss Only" if running a 3 link, or "Truss with Towers and Johnny Joints" if running upper control arms that connect to the factory axle side upper mounts.
Towers and Johnny Joints for the upper control arms sit higher than the factory JK axle. Adjustable upper control arms with flex joints are recommended.
Requires trimming 2" of the casting from the driver side to fit the truss, lower control arm mount and shock mount.
Due to the extra width of the Dana 60 the lower control arm mounts are wider than the factory JK axle. Adjustable lower control arms with flex joints are recommended.
If you are running a Front 3 Link or Front Triangulated 4 Link choose "Truss Only" option from the drop down menu, SKU # 2185. Please add 1 or 2 of SKU # 1114 as it makes an excellent upper control arm mount when placed on top of the truss.
[ITEMPRICE]