1. Home
  2. Link Suspension
  3. Link Suspension Kits
  4. Trail Gear
  5. Trail Gear Trail-Link 3, Front SAS Kit "C", Tacoma, 3.4L, 1995.5

Trail Gear Trail-Link 3, Front SAS Kit "C", Tacoma, 3.4L, 1995.5

0 Review(s) Write a Review
Your Price: $6,839.00
Part Number: TG-

Choose Options

Tacoma Trail-Link Front 3-Link Kit

Continuing with the line of Trail-Link kits, Trail-Gear has developed a Front 3 link kit to work with  1995-2004 Toyota Tacomas.This kit is affordable, user friendly, and strong. The Panhard is 1.25” x .250” wall DOM material, the other link material is 2" x .250" wall DOM tubing, and the rod ends are 1.25" Creeper Joints. The Panhard bracket on the axle is 3/16” thick and all other brackets are 1/4” steel, formed and welded. Kit includes all necessary link hardware except for upper shock mounts. Upper shock mount location is determined based on the desired ride height and needs of the vehicle. This kit is designed to work with our True Tacoma width LHD Rock Assault axle P/N 140312-1-KIT and high steer.

Trail-Gear offers four different Tacoma four 3-Link Suspension kits. We feel that offering a selection allows the customer to pick the kit that is best suited and priced for their unique build. All gussets and frame supports are included, so the Tacoma will be much stronger when you finish than it was from the factory. These kits are built by Tacoma owners, for Tacoma owners. If you have any questions you can call our technical support line with confidence that you will be speaking with a fully trained professional, who will assist you with any questions that you may have during your installation.

Tacoma Trail-Link Front 3-Link Kit Only:
TG Shock Mount Kit
Lower Link Mount
Upper Axle Link Bracket
Panhard Brackets
Driver-side Front Frame Bracket
Passenger-side Front Frame Bracket
Panhard Bar
3x RH & LH Creeper Joints with Bungs
2x Rod Ends with Bungs
Misalignment Spacers
Shock Straps
Link
3-hole gussets

Tacoma Trail-Link Front 3-Link Kit A:
Everything in Tacoma Trail-Link Front 3-Link Kit Only plus:
Front Frame Reinforcement Plates (with IFS Box Mount Kit)
Steering Shaft
Steering Couplers
Firewall Plate

Tacoma Trail-Link Front 3-Link Kit B:
Everything in Tacoma Trail-Link Front 3-Link Kit A plus:
Front Extended Brake Lines
Fully Loaded Calipers
Caliper Hard Lines
Vented Brake Rotors
Knuckle Service Kit with Wheel Bearings
Tacoma High Steer Kit 
Fully Loaded Six Shooter Knuckles
Knuckle Hardware
86-88 IFS Steering Box
Oil Pan Kit (2.7L or 3.4L)
Power Steering Hose Conversion Kit
Single T-Case Crossmember

Tacoma Trail-Link Front 3-Link Kit C:
Everything in Tacoma Trail-Link Front 3-Link Kit B plus:
Rock Assault Front Axle Housing
Rock Assault Steering Stops
Dirty 30s 30 Spline Birfield/Axle Kit
Assembled 3rd Member
Your choice of a Detroit or ARB Locker
Note: Compressor is included in Kit C w/ARB Locker.

*PLEASE CALL FOR A SHIPPING QUOTE*

Note For The Tacoma Trail-Link Front 3-Link Kit A, B, and C: You will need the following components to complete your build:

(2) Toyota Solid Axle Spindles, 140205-1-KIT
(2) Brass Spindle Bushings, 140105-1-KIT
(1) Toyota Solid Axle Hubs (Pair), 140448-1-KIT or 140449-1-KIT
(2) Aisin Locking Hubs or (1) Creeper Flange Kit, 300468-1-KIT or 140134-1-KIT
(1) Super Metal Hub Stud Kit, 300578-1-KIT
(1) Super Metal Spindle Stud Kit, 300573-1-KIT
(12) Front Wheel Studs, 140392-1-KIT
(12) Toyota Lug Nuts, 140080-1-KIT
(4) Steering Stop Bolts
(1) Set of Wheel Spacers may be required with some rims to clear the brake calipers

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Related Items

Recently Viewed Items