Angled Frame Panhards
These offset and adjustable panhard brackets are laser cut and formed in our own facility. They are designed to have a 15° angle from vertical. The three mounting holes are 9/16” in diameter and spaced 1-3/4” apart, giving a total of 3-1/2” of adjustment. These brackets are shipped unfinished and unwelded giving you the freedom to trim or adjust the bracket as desired.
This bracket was designed to work with 3/4-inch rod ends using misalignment spacers with an inside width of 1-3/4" and a 9/16" through-hole. Includes a weld-on reinforcement plate to strengthen bracket.
Please click this link for a detailed design view of each of these products: Angled Frame Panhards.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov