FOA 2.5 Coil Over Shock with Reservoir

0 Review(s) Write a Review
Your Price: $205.00
Part Number: FOA-25COSR
Free Shipping

Choose Options


This shock was the inspiration for our entire company. To build a quality 2.5 coilover shock that could be priced for the masses. These 2.5 bodied shocks cost about as much as the competitions 2.0's. Once you hold one of these in your hand, you'll know we hit the mark. We start with a 2.5 DOM body and machine in a large ACME thread to ease preload adjustment. We add full billet aluminum top caps and lower rod ends with replaceable heims. A fully rebuildable and revalvable piston/shim arrangement gives endless possibilities. Our billet seal head is set up with Buna-N seals, good for temps of 250 degrees, plus we offer a Viton seal upgrade that can handle temps up to 400 degrees for you hard chargers. The plated and hardened chrome 7/8 shaft ensures you that your shock is made for the long haul. Our upper spring preload adjuster can be easily adjusted and uses an allen wrench to lock it in place. Our large remote reservoir uses an internal floating piston to keep the oil and air separated. This ensures more consistent performance and aids in cooling as well.

Our smaller shocks (6-8") can be set up with a single coil spring, or you can opt for a dual rate setup as well. The larger shocks will all require the dual rate hardware...a $25 option that gets you the spring floater (divider) and a crossover adjustment nut for tuning options.

Orders are typically shipped within 14 working days from reciept of order. All products are custom built to order, and as such delays are possible depending upon current order levels. Please allow approx. 1 week shipping transit time for the east coast.

All FOA products carry a 6 month Warranty against defects in materials and workmanship.

All shocks/bumpstops ship without nitrogen charge and will need to be charged before usage.

-Recommended charge-
Emulsions- 150psi
reservoir- 150-250psi
bumpstops- 80-250psi

*****PLEASE NOTE--- These shocks will require 3"ID springs, purchased seperately*****

Related Items

Recently Viewed Items

Mailing List