Years of research and design have resulted in the development of the Corbeau 3-Inch 5-Point Harness Belts. The Corbeau 3-Inch Harness Belts are SFI 16.1 approved. The rules state that SFI approved harness belts must be replaced every two years. At this rate, spending over $200 for a belt that has to be replaced every two years can get very expensive. At only $99 for our latch and link belts and $149 for our camlock belts, your money is well spent with Corbeau. Our latch and link harness belts feature a quick release lever and use either bolt-in or wrap around mounting points. You simply lift up on the lever to disengage the straps. Our camlock harness belts feature the quick release camlock dial and also use either bolt-in or wrap around mounting points. With the camlock belt the right lap belt remains locked and the other four straps disengage when turning the dial. Both the latch and link and camlock harness belts have light weight pull down length adjusters making it very simple to adjust your harness belts. Three inch harness pads are also recommended for extra padding and to prevent the shoulder straps from rubbing your neck.
*This belt was intended for off highway use. In many cases our belts meet and exceed the FMVSS standards but they are not technically FMVSS approved. You purchase and use them at your own risk.